What do you do when you have a box spring and mattress and no bed set? Why, you make one of course. Bed sets are expensive and then you have to worry about getting matching furniture, a dresser, end tables, dressing table, etc. Who wants to shop through huge department stores offering no interest for five years and the best deals in town? Not me!
Instead of barn wood, this time I am going to use an old five panel door. It was a free door we got from a friend. They got it off of Craigslist. If you are looking for one, I would suggest Craigslist, garage sales, swap meets, or construction areas. People tear down old houses and the stuff is just going to the dump, They are often glad for someone to take it off their hands.
One side of the door I had was covered in a seventies era wavy panel, which much to my glee, came off easily and uncovered that side of the door was unpainted. Therefore, it was easy to sand the edges and prep for finish. After two coats of polyurethane, it was ready to go. I used 2x4s to create legs that could easily be adjusted for height and screwed to any standard bed frame.
Now for the fun stuff. I purchased an old iron wheel on Craigslist which I used for the play Oklahoma. It is a great piece, but what in the world was I going to do with it afterwords? Using the door knob hole, I inserted the axle of the wheel and wired the socket from an an old lamp through the hole. I attached the wheel securely with a bolt and plugged that baby in. We have a headboard with a lamp all ready to go. Check out the video below!
Flat screen televisions are great. You can hang them on the wall, above the mantle, or use the stand to put them on a cabinet. They don’t take up too much room, but their picture quality is excellent. Plasma, LCD, or LED, each has their pros and cons. It used to be if you wanted a big screen tv you needed a large room because the bigger the screen, the bigger the tv. Rear projection tvs were big, but the picture quality was bad and it seemed like you constantly had to adjust them to get the best color mix and sharpness. Tube tvs are rarely seen anymore. Flat panel tvs are light, easy to move, and easy to adjust.
But they still require lots of cords. One day someone will come up with a working high quality way to transmit HD video wirelessly, but until then, we are stuck wiring up all components. If the owners of the house were forward thinking or you own the house, you can hide the wires inside the wall. Many new houses come with an outlet and cable jack high up on the wall where most people would put the tv. You can buy boxes to easily install and run cords through the walls behind the drywall.
But what do you do when you are renting or decide to hang a tv in an unusual place? You can’t or don’t want to run the cords through the wall. What can you do? You can use cable runners, which stick on the wall. They usually come in white and are paintable to match the wall color. If you can run them on top of some molding or chair rail, you may be able to camouflage the runner from a casual glance. But at the end of the day, it is still visible. Also, what are you going to do at the end of the run? The cords have to come out somewhere. Do you have a media cabinet or shelf to put them on? Is that hidden from view? If you have a good system, you may have everything running through a receiver and only one HDMI cable going to your tv. You still want to hide that cord. My receiver is old, so it doesn’t have a way to run HDMI.
What components do you have running to your tv: Apple TV, Xbox, Playstation, Fire TV, DVD player, Bluray player, cable box? I have some components onside an old antique radio under the tv and some on shelves hidden by a privacy screen. So I had a lot of cords running all over the place.
To solve the problem of the cord nest in a stylish and designer approved way, I turned to my stash of barn wood I still had from taking down the barn. I made a frame out of 1×2 boards to start. I took the barn wood, cleaned the boards with a power washer, and ripped them to the same width. I then nailed them to the frame at an angle. I took my circular saw and cut them to the frame, then cleaned the line with a flush cut bit on my router. I nailed some perpendicular pieces across the boards on the back to strengthen it up and cut out some channels in the frame where the cords drop from the tv and out the sides.
Using a level and a stud finder, I prepped the piece to hang on the wall. It took three people to hang, two to hold and one to run the cords. I pushed it up against the tv and screwed it to the wall. It created four screw holes in the wall, but that’s no different than hanging pictures on the wall and can be easily patched. Now I have I great decorative piece on the wall that also hides all of my cords. Mission accomplished. Check out the video below and try it out for your house.